VIDEO SENSOR X-CAMP
XCam-p is a real-time video-sensor enclosed in a rugged elegant housing for vehicle presence detection at intersections and on ramps.
GENERAL FEATURES
The XCam-p is a low cost sensor that allows a more cost effective option to replace loop-based detection.
System setup and modification of detection zones are performed within a few minutes, with a friendly graphical user interface (GUI) via a laptop computer.
Detection zones are easily associated with loop detector outputs for a direct loop replacement.
Fail-safe functionality allow for true 24/7 operation.
The XCam-p, for direct loop replacement, communicates with SCAE Controller through RS485 line via communications protocols and with any other traffic controller through a communications interface card (XCom).
The XCam-p can be installed up to a distance of 300m from SCAE Controller or form the XCom, which is typically installed in the traffic controller cabinet. A wireless module enables a wireless connection of several XCam-p video
sensors.
APPLICATIONS
- Replacement of traditional loops.
- Presence detection at stop lines.
- Access control on ramps.
- Accurate detection of vehicular presence at intersections.
- Direct loop replacement.
- Low power consumption and wireless communication for easy use and integration.
- Video streaming for monitoring traffic light junctions.
- Direct communication with the traffic light controller and easy integration into the existing traffic light system.
- Improves road safety and mobility by reducing the environmental impact of road congestion.
CARATTERISTICHE TECNICHE
Sensor
- 1/4’’ VGA CMOS sensor
- Minimum illumination 0.04 lux. @ f/1.2
- Anti-blooming, zero smearing
- Signal to Noise ratio: >50Db
Housing
- IP67 Injection molded polycarbonate housing
- Sun shield for hot climate and direct sun exposure
- Size: 132 x 254 x 124 mm
Hardware
- Power Supply: +12/24V AC/DC
- Power consumption: < 3W
- Temperature: -34°C / +74°C
- Humidity: 0 to 95% RH, non condensing
- Weight: 600 g
Communications
- Wireless module (GPRS, ISM)
- Output to SCAE controller: RS485
- Output to XCom: Ethernet or RS485
XCom communications board (optional)
- Communications to a traffic controller
- 24 open collectors
- Ethernet
- Serial
- DIN-rail mountable
- Size: 175 x 107 x 26 mm
- Connection to PC: USB, Ethernet